Laser Fume Extraction Systems
 |
ADVANTAGE PVC
is designed for the laser marking, coding and engraving of
PVC.
|
- Blower with high airflow and pressure
- HCL and VOC gas sensors
- Automatic closed loop flow control
- Technically advanced start/stop interfaces to laser
|
The BOFA Advantage PVC extraction system has
been specifically designed to effectively deal with the
extremely corrosive fumes that are generated when lasing
PVC.
Each unit is fitted with a specific HCL sensor as well as a
general purpose VOC sensor to continually monitor the
exhaust air of the unit. Automatic closed loop flow control
comes as standard so consistent processing conditions are
maintained. BOFA's patent pending, Easi-Glide filter
location mechanism makes filter change simple, quick and
safe. |
| |
TECHNICAL DATA |
|
| |
Model |
AD PVC |
|
| |
Dimensions
(H x W x D) |
32.3" x 19.7" x 19.7" |
|
| |
Cabinet
Construction |
Brushed stainless steel with epoxy
coated internal contact components |
|
| |
Blower |
1.1 KW 191 CFM |
|
| |
Electronics |
115 V; 1ph 50/60 Hz
Full load current: 14.4 amps |
|
| |
Airflow Through Filters
|
|
| |
Component Diagram
| |
1. Unit/Filter Condition Display -
Automatic Closed Loop Flow Control
|
5. Hose inlet connection, 75mm
|
| |
2. On/Off Switch |
6. Signal/Interface Cable to Laser
|
| |
3. Filter Housing Cam Latch
|
7. Power cable
|
| |
4. Alternate exhaust outlet
|
8. Motor Cooling Inlet
|
|
|
|
| |
AD PVC PRE-FILTER
|
|
| |
AD PVC COMBINED FILTER
|
|
