Downdraft Tables
for Aluminum Dust Collection
Aluminum dust must be treated with care and respect. Aluminum particles
-
when in dust, powder, or flake forms from operations such as
grinding, finishing, polishing, etc. - may be
suspended as a dust cloud in air and consequently may ignite and cause
serious damage. If the dust cloud is unconfined the effect is simply one
of flash fire. If, however, the ignited dust cloud is at least partially
confined, the heat of combustion may result in an explosion. Aluminum
dust must never be mixed with steel or other ferrous dusts or with other
potentially explosive or flammable dusts. Meets NFPA 484 (2006) when properly used and
maintained.
ALUMINUM DOWNDRAFT TABLE SIZES
(CUSTOM CONFIGURATIONS & SIZES WELCOME) |
| Model |
Work
Surface |
Nominal
CFM |
Table
Capacity |
Average Face
Velocity |
Size:
D x W x H |
|
PT2032-Al |
20" x 32" |
2000 |
200 lbs. |
300 - 400 FPM |
33" x 44" x 51" |
|
BG3036-AL |
30" x 36" |
2000 |
500 lbs. |
150 - 180 FPM |
48" X 36" X 58" |
|
BG3048-AL |
30" x 48" |
2000 |
500 - 750 lbs. |
120 - 150 FPM |
48" X 48" X 58" |
|
BG3060-AL |
30" x 60" |
2500 |
1000 lbs. |
120 - 135 FPM |
48" X 60" X 58" |
|
BG3072-AL |
30" x 72" |
3000 |
1000 lbs. |
100 - 140 FPM |
48" X 72" X 58" |
|
BG3096-AL |
30" x 96" |
4000 |
1500 lbs. |
120 - 150 FPM |
48" X 96" X 58" |
The
wet and dry industrial downdraft tables
sold through Downdraft.com resolve air pollution and manufacturing
challenges in the workplace by:
- reducing the risk of exposure to harmful substances
- draws polluted air away from breathing zones
- non-sparking table grates, vent back, side wings and fan wheel
- patented vented back increases pollutant capture area
- accommodates various sized support equipment
- increases employee and operator safety and comfort levels
- operates a comfortable noise level
- helps meet or exceed OSHA and EPA standards
- equipped with high efficiency filters for effective air cleansing
- optional caster wheels available for easy movement
- tables are available in various standard sizes; custom sizes are available
- flat top down draft tables available
(click here)
- competitively priced; outstanding value
| |
DualDraw perforated table
grating is engineered
to provide excellent slot velocities |
 |
DOWNDRAFT TABLE SIZE CHOICES
|
Depth = 30", 35", 40", 45" 50"
Work surface height = 34"
Width = 36", 48" 60", 72", 96"
Height = 58"
Motor/Blower extension from rear of table = 18"
|
- Average Face Velocity = 150 - 400 FPM
(dependent upon blower/motor & table size combination)
- 2000 CFM - 6000 CFM (nominal) blowers
- 14 and 16 Gauge uni-body construction
- Direct drive blower motor
- Large work surface for a range of applications
- Removable clean-out tray in filter housing
- Completely self-contained; no outside ducting necessary
- Helps meet OSHA requirement 1910:1000 for industrial air quality
- Custom is standard
|
- HEPA filtration; 99.97% efficient @ 0.3 microns
- Caster wheel system for easy movement
- Rubber table mats for non-scratch working surface
- Removable dust pan in main body of unit for easy clean-out
|
 |
Downdraft.com's supplier is the first company to
manufacture downdraft tables and downdraft booths that
have been designed with the disabled in mind. They
are wheelchair accessible for ADA (Americans with
Disabilities Act) requirements. All employees -
including the physically challenged - are now able
to work in a safe and comfortable environment designed
to meet their needs. All downdraft tables and downdraft
booths have plenty of table top room for extra tools and
accessories. Electrical outlets are provided and are
within easy reach. |
