|
|
 |
Are you concerned about the
various NFPA* Standards concerning hazardous dusts such as aluminum and
titanium? Have you had fires from grinding, buffing, or polishing
operations? Is your current dust collector not able to clean itself due to
sticky or stringy materials? If you answer yes to any of these questions,
the WetAer wet dust collection system may be the solution to your problem.
The WetAer is designed for safe and efficient collection of dusts from
various metal working applications such as grinding, deburring, polishing,
lapping, and sanding. The WetAer wet dust collector is designed for dusts
that can be wetted and have a specific gravity which causes the particulate
to sink. It can handle a variety of combustible applications and materials,
such as aluminum, magnesium, or titanium dust, and lint and buffing
compounds.
*Always consult with your local
codes and the NFPA for the recommendation and standards as they apply to
your specific application. NFPA is a registered trademark of the National
Fire Protection Association.
|
Get the Power
of the WetAer Wave
WET DUST COLLECTORS
 |
 |
 |
|
HOW DOES IT
WORK?
The contaminated air dust is drawn through a special designed inlet below
the water. The air is drawn upward from the fan pressure to the scrubber
section, where the air and water form a turbulent curtain or heavy wave-like
action for the mixing and the wetting of the dust particles. The wave is
forced against another baffle and completes the dust separation from the air
stream. The moisture laden clean air continues to be drawn upward to the
dual mist elimination section, where the visible water particles are
separated from the air stream. The clean air continues its path through the
blower section. The collected dust settles to the tank bottom for removal by
hand raking or flushing the tank bottom. An optional filtration system is
available to reduce sludge buildup. |
|
Features & Benefits |
 |
MODELS 1000 – 7500 CFM |
|
|
CONSTANT EFFICIENCY |
|
|
LOW OPERATING COSTS |
|
|
LOW MAINTENANCE |
|
|
LOW NOISE BELOW 80 dBA |
|
|
All STAINLESS STEEL FROM BLOWER SECTION DOWN |
|
|
SOLID BRASS FITTINGS |
|
|
NO FILTERS TO CHANGE |
|
|
SOLID STATE WATER LEVEL CONTROL |
|
|
DIRECT DRIVE BACKWARD INCLINE BLOWERS |
|
|
TEFC MOTORS |
|
|
DUAL IMPINGEMENT SECTION |
|
|
TOOL-LESS ACCESS |
|
|
MADE IN USA |
|
|
3 YEAR WARRANTY |
|
|
|
Model |
CFM |
D |
W |
H |
Inlet Dia. |
Inlet Center Ht |
HP |
|
WetAer
1000 |
1000 |
46 |
35 |
93 |
7" |
32" |
5 |
|
WetAer
2000 |
2000 |
46 |
35 |
93 |
8" |
32" |
5 |
|
WetAer
3000 |
3000 |
50 |
37 |
93 |
12" |
32" |
5 |
|
WetAer
4000 |
4000 |
55 |
41 |
93 |
14" |
32" |
7.5 |
|
WetAer
5000 |
5000 |
65 |
47 |
93 |
16" |
32" |
10 |
|
WetAer
7500 |
7500 |
87 |
58 |
113 |
18" |
32" |
20 |
|
|
PRICING
Credit
Card Purchases Welcome
 |
|
Wet Dust Collectors |
| Model |
CFM Range |
HP |
|
Price |
| WetAer 1000 |
1000 @ 8" |
3 |
- |
14,270.00 |
| WetAer 2000 |
2000 @ 8" |
3 |
- |
15,200.00 |
| WetAer 3000 |
3000 @ 8" |
5 |
- |
17,424.00 |
| WetAer 4000 |
4000 @ 8" |
7.5 |
- |
18,824.00 |
| WetAer 5000 |
5000 @ 8" |
10 |
- |
24,376.00 |
| WetAer 7500 |
7500 @ 8" |
20 |
- |
29,590.00 |
|
Pricing and
specifications subject to change without notice. |
MTA TECHNICAL
SALES
7513 Wystone Avenue
Reseda, CA 91335-2530
818.704.9700 / 800.784.5816
fax 818.342.7668
or
E-Mail us at: sales@mtasales.com
|
