Your Single Source for Mist Collection Equipment.

The AerPro Models C-500 & C-1000 are compact, efficient, and economical mist collectors for mounting directly on a wide variety of machines using either petroleum-based or synthetic coolants. Centrifugal separators remove submicronic contaminants from the plant atmosphere at the source, thereby minimizing problems encountered with old-style units, unsightly ductwork, obstruction of lighting, and excessive maintenance. The Model C-500 and Model C-1000 offers options and accessories such as, mounting brackets, hoses, and floor stands – all of which make installation procedures easy and efficient. An additional reduced maintenance filter (IN-COVER TRAP) is recommended for metalworking or chip producing applications.

Outstanding performance characteristics include two sizes 500 and 1000 CFM nominal and standard operating voltages of 230/460/3/60, 190/380/3/50/ Hz. For heavy smoke/mist applications, the addition of an HEPA Filter will deliver guaranteed filtration efficiency of 99.97% down to 0.3 microns.

HOW DOES IT WORK?
The oil laden mist enters from the front inlet where it impacts against the radial fan blades. The mist is then thrown by centrifugal force to the outside walls where it is driven though a perforated drum. During this process the mist is stripped of contaminants from the throwaway liner and is then coalesced into large droplets as it passes through the dense polyester felt primary filter. These droplets are then thrown free of the rotating drum and are driven to the outer casing whereby the liquid flows through the 360° slot. The droplets then enter a collection chamber for drainage. Clean air is returned to the work area through the exhaust grille.

In-Stock units available for immediate delivery.
Powder Coated Inside & Out for long life and appearance.
Each Unit Is Run For 2 Hours to ensure quality before shipping.
Low Noise 70 - 75 dBA

Best Centrifugal Efficiency due to engineered drum face gap.
Reduces Make-Up Air by recirculating clean air back into the plant.

Easy Direct Machine Mount eliminates duct work.
Maintenance Is Reduced to changing inexpensive disposable filter liners every few months.
3 Year Warranty.

Dimensioned C500 centrifugal mist collector.

C-500 Specifications

Airflow	500 CFM (849.5 m³/hr/) @ 60 Hz 450 CFM (765 m³/hr/) @ 50 Hz
Construction	Welded 16 Ga. Steel
Paint	Powder Coated inside and out AerPro Blue
Motor/Blower	1 HP, 3450 RPM TEFC
Electrical	460/230/3/60 or 380/190/3/50
Weight	95 lbs. (43 kg.)
Sound	72 dBA

Dimensioned C1000 centrifugal mist collector.

C-1000 Specifications

Airflow	500 CFM (849.5 m³/hr/) @ 60 Hz 450 CFM (765 m³/hr/) @ 50 Hz
Construction	Welded 16 Ga. Steel
Paint	Powder Coated inside and out AerPro Blue
Motor/Blower	1 HP, 3450 RPM TEFC
Electrical	460/230/3/60 or 380/190/3/50
Weight	95 lbs. (43 kg.)
Sound	72 dBA

Options:

After Filters: 99.97% @0.03 micron HEPA or 95% DOP.

In-Cover Prefilters are recommended on most chip producing machines.

Floor Stands and other mounting devices available.

	Your Single Source
	For	DownDraft
		tables, booths, air filtration & dust collection equipment